Indoor Bicycle Trainers, Rollers and Accessories

Because of the many technologies featured, SAGMA is likely the most advanced bicycle saddle you can currently find on the market. Not only the patented rail suspension and the new foam technology and Skin cover, but also the super short overall length are ahead of the competition. - Rail Suspension Design - idbeads foam technology with low-speed rebound properties - PU-Skin covering - Carbon-reinforced shell - Exchangeable shock absorber units with 3 different hardnesses (soft, regular, hard) - Aluminum rails 7x10mm (high-oval) - 225g

- Low-rise Black Ops chromoly BMX handle bar - 30-inch width with a 6-inch rise - Wide and low - Clamp Size: 22.2mm - Material: Chromoly

- Business in the front, party in the back with these 2-tone BMX saddles - PVC cover with a colored back strap and steel rails - Use: BMX - Rail: Steel - Cover Material: PVC - Size (LxW): 260mm x 160mm - Gender: Unisex

- Durable nylon+fiber body - Heat-treated chromoly spindle - Molded pins - Loose ball bearings - 375g/pair

- Forged alloy V-brakes with 103mm arms - Brilliantly anodized in a variety of colors - Compatible with 70mm threaded brake pads - Front or rear - 21mm–35mm reach

These super tough axles are constructed to Fox's exact specifications and made from 7075 Aluminium. Unlike any other fork axles on the market, these feature a unique double hex design. This includes the traditional 6mm that everyone is familiar with but with an added 8mm Allen key fitting as well. This feature makes removal much easier if the 6mm gets chewed up, over tightened or not removed for a long time. Having an Allen key fitting instead of a QR also allows the use of a torque wrench so you can be sure your wheel is correctly tightened. This Axle also comes with a grade 5 titanium pinch bolt and backing nut to finish things off. Clean, simple, and fast! Replacement for Fox PN: 820-09-071-KIT / Service Set: 2021 36-38 15x110 KaboltX Pinch-axle Assembly 820-09-063-KIT / Service Set: 2020 FOX-Marzocchi 15x110 QR Adjust Axle Assembly NOTE: This axle does not fit 2021+ 32 and 34. (Square Arch)

Unmatched comfort and unquestionably superior vibration dampening properties. The Burgtec Ride Wide Carbon Enduro Handlebars is built to take a beating. - Uni-Directional Carbon - 800mm width - 35mm bar clamp - 20mm or 30mm rise - 9 degree backsweep - 5 degree upsweep - Weight: 258g

Campagnolo Pulley Assemblies - Drivetrain Speeds: 10 - Does not fit 2004-2008 Record 10 speed (carbon pulley cage)

Campagnolo Extra Parts

Campagnolo Extra Parts

Campagnolo Extra Parts

Campagnolo Upper Bolt and Springs

- 50 tooth 11 speed Campagnolo chainring, for use with 34 tooth threaded inner chainring - Compatible with 2011-2014 Super Record, Record, Chorus and Comp Ultra cranksets - 110mm BCD

Put all your power into the pedals and race forward and put your confidence in the Campagnolo Potenza 11 brakes to keep you in control when needed. These are dual pivot front and rear brakes with forged alloy Skeleton arms that are lightweight and stiff. Includes special compound brake pads for optimal braking on both wet and dry surfaces. - Adjustable pad holders allow for micro adjustment - Brake Mount Type: Short Reach Caliper (39mm - 49mm) - Brake Position: Set - Brake Lever Actuation: Short Pull - Defined Color: Black - Pad Type: Cartridge - Weight: 321 grams

Campagnolo's Record EPS V2 Power Unit is the reliable brain of Campy's electronic shifting. In order to keep your bike looking sleek, the mounting options allow it to sit inside your bike's frame. The 3-cell, 12-volt Lithium-ion battery delivers up to 1,200 miles on a single charge. It also houses the electronics necessary to deliver pinpoint shifting precision to the front and rear derailleur mechanisms (sold separately). For example, if you're cross-chained, the system immediately senses it and moves the front derailleur ever so slightly to avoid chain rub. Plus, the one-piece, ultrasonically-sealed unit is impervious to water or road vibration.

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 17mm - Outer Diameter: 30mm - Width: 7mm

- Grade 10 chromium steel balls

Housing liner provides an extra line of protection between cables and housing. - Bridges gaps between housing segments

KS Dropper Post Service Parts

KS Dropper Post Service Parts

Don't let chain slap damage your frame — pick up Lezyne's C-Stay Protector. It's made of heavy-duty neoprene with a slip resistant rubber inner and a Velcro closure to keep it in place.

NEW: Please refer to our chart for the correct adapter size you need. Disc brake adaptors available for Shimano, SRAM, Hope, Hayes, Formula, etc. rotors CNC machined from 6061 T6511 aluminum. Machined surfaces allow for better caliper alignment and a more rigid brake setup. The Post Mount standard is universal for front and rear brakes. Frames and forks that use the post-mount brake interface use a stock size varying from 160mm to 203mm. It’s important to check your frame and fork for the default post mount size before ordering a suitable adapter. To calculate the size of the required adapter, subtract the frame/fork stock mount size from the desired rotor size. If you’re using brakes with large calipers (Magura MT5/MT7, Hope Tech V4, Hayes Dominion A4, etc.), please also order a low profile (button head) bolt kit to ensure correct fitment. Our disc brake adapters do not come with mounting bolts but if needed, we have sets of 4 bolts available. Not currently compatible with TRP 203mm rotors.

Origin-8's 1 1/8-inch Headset Spacers are made of lightweight and durable aluminum and come in 2mm, 5mm or 10mm thicknesses and lots of cool colors to add style to your ride. You get a bag of 10 spacers.

Entirely manufactured in the UK, this brand new stem combines precision engineering, function-led form and our trademark commitment to sustainability. Custom-made stainless steel bolts ensure that the no-gap face plate is perfectly aligned; critical in protecting the handlebar and delivering strong, consistent clamping force. Machined in our factory in the south of England. The VFS Stem body and face plate is made from UK-sourced aluminium that has a minimum of 75% recycled content, making this the most environmentally-friendly stem on the market. Specifications: - Stem: 75% recycled aluminium manufactured by PEMBREE - Bolts: Custom UK-made stainless steel, manufactured by Precision Products - Environment: Carbon Neutral - Length: 35mm - Handlebar: 35mm - Rise: 0 degree - Weight: 148g - Warranty: 5 Years - Certification: EFBE Tri-Test Certified

SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact. - Injection molded plastic crank arm protection - Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes - Material: Injection molded plastic - Recommended Group: XX1, X01, XX, X0

Get the most out of SRAM's high-tech cranksets with the GXP Team Bottom Bracket. Built to last, this super-smooth bottom bracket makes your SRAM GXP crankset a powerhouse without weighing you down.

SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. Shifting pins and ramped teeth deliver precision shifting, too.

SRAM's DoubleTap Control Levers are the cornerstone of SRAM's road biking world. Because you're able to shift from the hoods, drops, and even when sprinting, the Rival levers offer a competitive advantage that can't be touched. The single-lever-shifting design allows for faster, smoother shifts while being completely independent of the brake levers, eliminating the possibility of engaging the brakes when you shift. Plus, the carbon fiber ergonomic levers are incredibly light, aero and hide all the cables for an ultra-clean look.

Stainless steel cables are extruded to provide a smooth low-friction surface.

When things get hectic, a missed shift can be the difference between winning and losing, cleaning a hard section or walking. So SRAM designed the ultra-compact X9 shifters with an Exact Actuation 1:1 cable pull ratio and the same ball bearing lever pivots used in XO and XX shifters to deliver lightning fast shifts. Crafted from lightweight aluminum and composite materials, the X9s will meet the demands of any rider. You've got plenty going on when flying down the trail, with SRAM X9 triggers that list gets a lot shorter.