Your Search: "shiv"

Specialized's Shiv Carbon Seatpost is crafted from Specialized's FACT carbon for a premium blend of ultra lightness, outstanding power transfer and vibration damping. And, its single-bolt clamp holds fast and makes seat adjustments easy. The Shiv Carbon Seatpost only fits Specialized Shiv bicycles.

Designed to be used with the revolutionary Shiv, the Fuelselage is the ultimate integrated hydration system. - Available in two sizes: 0932-1001 fits X-Small/Small Shiv frames 0932-1003 fits Medium/Large/X-Large Shiv frames

This replacement seatpost for the Shiv Disc ensures the perfect fit with two different setback options— 0mm and 25mm. - Aerodynamic FACT carbon construction that's compatible with the Shiv Disc. - Profile that integrates with the shape of the rear Hydration Fuelcell for maximum aerodynamic performance. - Cylindrical aluminum head assembly adjusts fore/aft and tilt with a single bolt. - Setback: 0/+25mm

Developed to work on either the Specialized Carbon or Hydroformed Alloy Aerobar, the Shiv Low-Stack Clamp reduces up to 19mm of stack height, in order to obtain a lower position while in the Aerobars. - Compatible w/ Specialized Carbon or Hydroformed Alloy Aerobar (2102-2010 / 2102-2005) - Reduces 19mm (1.9cm) of stack height

The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.

The Stem Shim Adapter helps to accommodate different diameter steerer tube and stem clamp combinations.

The Stem Shim Adapter helps to accommodate different diameter steerer tube and stem clamp combinations.

22.2mm shim kit to mount control levers. Slater bars are 19mm diameter. The shim kit allows for standard 22.2mm brake, shift and dropper post levers to be used.

The Problem Solvers Steerer Tube Shims are for installing 1-1/8-inch diameter threadless stems on 1-inch diameter threadless forks. The shim is made of light, durable anodized aluminum and is chamfered on the ends for easy stem installation.

- Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort, and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Anti-abrasion material at calf protects sleeve and skin against pedal strikes - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage

Invisa-Lite shin guards feature harder durometer 3D foam on the outside and an inner softer layer for comfort. - Breathable, lightweight lycra body - Interior anti-slip silicone band - Protection Area: Shin - Pad Type: Foam

These handy Problem Solvers Eccentric Bottom Bracket Shims allow you to fit your existing Eccentric Bottom Bracket into BB shells with inner diameters of 55mm or 57mm. - Anodized black - 6061 Aluminum

These handy Problem Solvers Eccentric Bottom Bracket Shims allow you to fit your existing Eccentric Bottom Bracket into BB shells with inner diameters of 55mm or 57mm. - Anodized black - 6061 Aluminum

Shims for fitting 26.0mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 26.0mm - Length: 44mm - Machined Aluminum - Anodized Black

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Shims for fitting 25.4mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 25.4mm - Length: 48mm - Machined Aluminum - Anodized Black

Take on the toughest terrain and upgrade your e-bike drivetrain with our Shimano e*spec Direct Mount Chainrings. Our M3 narrow-wide tooth profile reduces weight without compromising on chain retention. Our premium aluminum rings provide cleaner aesthetics, lighter weight, and long-lasting performance. Take on the elements with confidence and power up your drivetrain now! - Direct Mount chainring for Bosch and Shimano E-Bike fitment - Updated M3 narrow-wide tooth profile eliminates chain noise and decreases overall system wear while retaining chain - 11/12 speed. Compatible with both Shimano and SRAM 12-speed drivetrains

The thin profile Aireator features an open mesh weave over the foot top, making these lightweight socks ideal for all forms of cycling and everyday adventure. Breathable, moisture-wicking, and durable, in single or double cuff. - No padding - 4-season - Synthetic Content: 60% Nylon, 39% Recycled Polyester, 1% Lycra

Protect your shins and ankles with a nylon hard shield with EVA foam backing and a super durable Cordura front material. Extra padding on the inside to protect the inner part of your leg when catching tailwhips. - Highly durable Cordura front material - Concealed inner pocket for nylon shield - Inside leg, whip protection pad - Integrated ankle protection - Super stretch perforated neoprene straps - Protection Area: Shin, Ankle - Pad Type: Hard Shell over Foam - Sold in Pairs

PIVOTING HARD SHELL IMPACT FOAM PROTECTOR The Dual-Axis knee and shin guard is our top performer for a reason, not only does it have CE certified impact knee protector but also has dual pivots each side that copy the natural knee motion for the best comfort. This is the toughest guard out there! The combination of impact absorbing foam covered by a hard- shell chassis fits perfectly due to a secure and comfortable strapping system. - Has a Leatt protection score of 25, next step up in protection would be the Z-Frame knee brace. - Hard shell and 3DF ventilated impact foam - Anatomically correct, pivoting design for left and right sides ensures perfect motion - Slim shin plate that also fits inside boots - Vented plates for maximum airflow - CE tested and certified as impact protection: - Knee and shin EN1621-1 - Total Leatt protection score of 25 points - Weight: from 850g (1.87lbs) pair

This hard-shell, extended-length knee and shin guard with soft 3DF impact foam promises comfort paired with premium protection. It's a great product for all soft knee pad users who are tired of ripping their shins but are still looking for a soft knee pad feel. Now with a slimmer knee pad profile, a ventilated and perforated sleeve, and a newly integrated silicone coated thigh strap for that solid fit with ergonomic left/right shapes. 3DF AirFit impact foam offers a soft and flexible fit, yet instantly transforms into a harder, energy-absorbing protector upon impact. These pads are CE tested for certified protection that scores a total of 19 points in the Leatt protection rating system. - Abrasion-resistant Aramid outer layer for durability - Anti-odor MoistureCool and AirMesh wicking fabrics - Our 3D design ensures a great fit that is very comfortable - Slim shin plate that also fits inside boots - Weight: from 700g (1.54lbs) pair CE tested and certified as impact protection - Knee and shin: EN1621-1 - Full shin extended length: EXT

- Megatooth thick thin tooth design for Shimano 12sp mountain chain engagement - Direct mount FSA modular crank model-specific rings

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

- Megatooth thick thin tooth design for Shimano 12sp mountain chain engagement - Direct mount FSA modular crank model-specific rings - Precision CNC machined AL7075/T6 - Long tooth profile enhances chain retention - BCD: Direct Mount - Crankset Compatibility: KFX - SH12: Compatible with Shimano 12s chain

- Megatooth thick thin tooth design for Shimano 12sp mountain chain engagement - Direct mount FSA modular crank model-specific rings

These direct-mount chainrings coincide perfectly with the Comet Modular Crank. The megatooth design allows you to put all of your power through without worrying about dropping your chain. All sizes of these chainrings are steel and range from 26T to 38T. - Megatooth thick thin tooth design for Shimano 12sp mountain chain engagement - Direct mount FSA modular crank model-specific rings - Optimized new 11-speed system

The Problem Solvers Direct Mount Adapter gives you a place to install direct-mount Shimano and SRAM derailleurs. It was initially developed for standard mountain bike frames with 68/73mm wide bottom bracket shells, and is equally suited to fat/snow bikes, where their 100mm wide bottom brackets make front derailleur applications a little difficult. The adapter is made of light and durable 6061 aluminum.

Derailleur shims for adapting front derailleur clamps to a different sized frame seat tube. - Derailleur = the size of the clamp on the front derailleur you have - Frame = the size of the seat tube the derailleur plus shim will fit

Derailleur shims for adapting front derailleur clamps to a different sized frame seat tube. - Derailleur = the size of the clamp on the front derailleur you have - Frame = the size of the seat tube the derailleur plus shim will fit

Parts for repair and maintenance of DT Swiss hubs.