Parts

SRAM's RED shifters maximize the rider/bike interface. SRAM delivers on those bold words with every detail analyzed and refined: the transition from the hoods to the handlebar is smooth and seamless, the hood texture increases grip while offering additional cushioning, there's ample room for your fingers thanks to an overall smaller diameter and increased space behind the brake lever, and the larger, repositioned brake and shift levers give you unmatched control. And if that wasn't enough to make your hands feel right-at-home, independent reach adjustments for the shift and brake levers, and your choice of cable routing, will have you racking up record mileage. In addition to the high-end ergonomics and comfort, SRAM's renowned DoubleTap technology fires off up- and down-shifts from a single lever, reduces weight and leaves your brake-lever unfettered by shifting. Plus, the ZeroLoss cable pull yields immediate shifts for lightning-fast response. And the new no-trim front shifting works flawless with SRAM's revolutionary Yaw motion front derailleur.

The day-in, day-out Eagle ecosystem hero is now available with AXS. The GX AXS upgrade kit is your entry point into wireless drivetrain simplicity. Compatible with any of our Eagle ecosystem cassettes and crank arms, the upgrade kit allows you to experience AXS without needing to buy an entire groupset—provided you already are using Eagle products. No matter if you are looking to upgrade your ride or looking for great value replacement parts, look no further than the GX AXS upgrade kit. - Includes the SRAM GX Eagle AXS rear derailleur with battery, Eagle controller with clamp, charger with cord, and chain gap tool - The GX Eagle AXS rear derailleur shifts on command, whether under climbing load or sprinting to the stage finish, and is smart enough to protect itself thanks to its incredibly resilient Overload Clutch - Rear derailleur is compatible with 10-50t and 10-52t cassettes - The GX Eagle AXS controller offers a unique wireless shifting experience with ergonomic touchpoints that are customizable to your preferences. You can choose what each button does through the AXS App

The new Reverb AXS XPLR dropper post delivers more control, confidence, and fun on gravel roads everywhere. Getting the saddle out of the way means more room to move, saving you from awkward maneuvering and sketchy descents. We created an all-new design complete with lightweight air-only internals featuring built-in compliance we call ActiveRide. It's like travel for your saddle. Enabled by SRAM AXS technology, Reverb AXS XPLR is part of the ultimate personalized cockpit. - New 27.2mm Reverb AXS XPLR delivers more control, confidence, and fun for gravel - ActiveRide—Air only internals provide a fully rigid top-out position. With the touch of your AXS controller, you've got built-in compliance to ensure comfort and control over the roughest sections of gravel - Two travel options to choose—50mm or 75mm - Saddle clamp options compatible with 7x10 oval carbon rails. - Seat post length includes 400mm and 350mm (50mm drop only) - AXS Technology allows rider customization via the AXS Mobile App - AXS handlebar controls (drop or flat bar) - Shared battery with all other SRAM AXS enabled components - System is completely waterproof and dustproof to IP69K—take it anywhere - SRAM AXS battery and charger included SPECIFICATIONS: - TRAVEL: 50mm, 75mm - POST DIAMETER: 27.2mm - POST LENGTH: 350mm, 400mm - REMOTE: AXS Controller Sold Separately - SADDLE RAIL COMPATIBILITY: Round/Oval (7x9 & 7x10), Round/Oval (7x9) - WEIGHT (G): 562 - WEIGHT BASED ON: 75mm Travel 400mm Length W/O battery - Battery 25g

Cane Creek is proud to introduce the new Air IL and Coil IL shocks packing class-leading performance in a smaller and stronger package. IL shocks feature class-leading externally adjustable DB Twin Tube technology for the widest range of 4-way damping adjustability on the market. Both AIR IL and Coil IL now feature a thicker inner damper tube for increased strength and a 17mm reduction in overall width on the valve body to increase fitment possibilities on tight frames. AIR IL features a 6mm reduction in the outer diameter of the Air spring to further increase the likelihood of fitment while increasing the max psi pressure up to 350psi (Up from 300psi). Coil IL features added detents on the preload collar allow more precise preload tuning. Hand-assembled and individually dyno-tested in our Western North Carolina facility, IL shocks continue to provide a level of quality, performance, and rider benefit that is unmatched.

SRAM GX Eagle drivetrains are engineered for optimal performance. Eagle drivetrains are designed, tested, and proven to deliver durable performance for all riders. Eagle technology provides an expanded, optimum gear range and is 100-percent compatible with all levels of SRAM Eagle drivetrain systems. - The GX crankset is engineered for complete chain control with each tooth precisely designed to work seamlessly with the chain’s inner and outer links - The GX Eagle rear derailleur gets the job done with an updated cage architecture that improves chain management and is compatible with both 10-52T and 10-50T cassettes - The XG-1275 10-52T cassette offers expanded 520% gear range and features SRAM's Full Pin technology, making it both lightweight and durable - The trigger shifter puts total control of your gear selection into the thumb of one hand - GX Eagle chain for smooth and efficient shifting - DUB bottom bracket sold separately

A carbon fork designed for bikepacking and endless exploration. Experience easier carrying of all possible accessories for everything from overnight endeavors to epic self-supported excursions with the ENVE Adventure Fork. The ENVE Adventure fork provides a lighter weight option for bikepackers and frame builders, while still maintaining reliability and strength. The dynamo light and charger routing is an integrated and protected solution to self-supported bike riders' needs. Finally, the fork chip option gives builders versatility in the fork by adjusting the axle-to-crown for different bike geometries for alternative bikepacking methods. In a market that's filled with heavy steel fork options, the ENVE Adventure fork offers bikepackers an opportunity to lighten their overall bike load through our trusted carbon fiber fork expertise. - Three-Pack Accessory Mounts - Fender and Rack Mounts - Reversible Drop-Out Chips for Adjustable Axle-To-Crown and Rake - Internal Dynamo Routing for Lights and Electronics Charging - Axle Spacing 12 x 100mm - Compatible Rotor Sizes 140mm & 160mm - 700 x 50mm Tire Clearance

A truly all season, all terrain fork for fat-bikes with maximum tire clearance. This fork utilizes a reversible drop-out chip that adjusts the rake, allowing for multiple wheel sizes. With over 10 years of carbon experience, ENVE is the trusted source for many when it comes to forks. After creating the most innovative rigid mountain fork in the market, we set our sights on fat bike forks. Like all ENVE Forks, the Fat Fork is molded in one-piece from the steerer to the drop-outs and utilizes a reversible chip to adjust for optimized handling with 26 or 27.5-inch wheels. Adding trusted reliability and lightweight design to 5-inches of tire clearance, this is the upgrade to have for your all-season rig. - Material: Carbon - Weight: 748g - Steer Tube length: 350mm - Rake: 42mm, 51mm (adjustable) - Axle To Crown: 488.8mm - Max Rotor Size: 160mm - 203mm - Max Tire Clearance: 5.2-inch - Crown Race Diameter: 1.5-inch - Torque Spec – Steer Tube: 5.5Nm - Torque Spec - Axle: 8Nm

The Shimano Dura-Ace FC-R9200 crank performs two vital functions; transferring your pedaling effort into the drivetrain and ensuring the fastest, most precise front shifting available. With HOLLOWTECH II crank arms to ensure light weight and Shimano's class-leading chainring designs, the FC-R9200 won't let you down. - Optimal balance of stiffness, strength, weight and rotational performance - HOLLOWGLIDE structure cuts weight yet maintains strength for better power transfer and quicker, more precise front shifting - 148mm Q-factor - 44.5mm chainline

When the engineering superpowers of Trek and RockShox combine, the results are anything but ordinary. Completely reimagined, the Super Deluxe Ultimate ThruShaft was created with a go anywhere, ride anything attitude. The ideal match for the next generation of hard hitting all-mountain enduro bikes. Features - Trek's exclusive ThruShaft design responds to changes in terrain faster than any other shock on the market - Versatility is key for a go anywhere, do anything attitude. Dial it in with redesigned Low Speed Compression adjustment, offering three options to find your perfect match to seize the day - Featuring an oversized thermal compensator for greater temperature stability and consistent suspension feel on those extra long, extra demanding descents - Time to adjust. With a "fully checked" damper, your compression settings work independently, not to be bothered by each click of Rebound - Setting up your Rebound is made simple with numerically indicated adjustments to eliminate the need for number crunching - Shock controls optimized for frame integration and rider ergonomics - Available in Trek-specific Trunnion ThruShaft 230x57.5 and 230x62.5 configurations - MegNeg air can is not compatible with MY21 Super Deluxe Ultimate ThruShaft. - Only compatible with purple tokens for positive and negative air spring tuning

Suspension is all about control and Cane Creek's DBcoil Damper has it. This rear damper is loaded with the adjustability you need to tailor rear suspension characteristics to your riding style, bike, and local trails. An extensive tuning range includes high- and low-speed compression and high- and low-speed rebound. Where does the Double Barrel name come from? Cane Creek's Double Barrel technology circulates oil continuously through the valving to achieve highly controllable, independent damping for both compression and rebound strokes so the shock retains its plushness and sensitivity from the top to the bottom of the trail, no matter how long the descent.

Record 12-Speed controls are aesthetically pleasing and functional. The unidirectional carbon design offers riders two different lever-handlebar positions to adapt different size hands, maximizing control. This results in consistent power, stiffness and reliability for when you need it. - Hydraulic disc brake actuation - Vari-Cushion technology offers an ergonomic, comfortable and safe support and grip - The “one lever-one action” feature assigns each lever one function to prevent shifting errors - Ultra-Shift mechanism enables upshifting up to three gears at a time, and downshifting a full five - Disc rotor sold separately Specifications: - Pad Compound: Semi-Metallic - Brake Caliper Mount: Flat Mount - Brake Lever Use: Right - Hydraulic Fluid Type: Mineral Oil - Rear Der/Shifter Compatibility: Campy 12-Speed Chorus/Record/Super Record 2019+ - Drivetrain Speeds: 12 - Adjustable Reach: Yes

The OSPW X for SRAM Eagle AXS features a narrow wide tooth profile to ensure durable chain retention. The 14-tooth upper and 18-tooth lower pulleys reduce chain drag, while the custom-designed carbon fiber pulley cage ensures both durability and light weight. - Pulley Wheels: CeramicSpeed 14-tooth upper and 18-tooth lower - Pulley Wheel Material: aluminum - Cage Material: Carbon-reinforced PA - Bearing Options: CeramicSpeed Standard or Coated - CeramicSpeed Grease/Oil: Pulley Oil - Compatibility: SRAM Eagle AXS (Electronic) - Compatibility Cassette: 10-52 tooth max - Spring Tension Settings: 3 - Speed: 12-speed - Discipline: Off-road and Gravity In the box: - A complete OSPW X System for SRAM Eagle AXS - CeramicSpeed Bearing Oil in a 15ml dropper bottle

One of the most successful and hard-working RockShox forks of all time capitalizes on the innovations born from SID. It features a chassis that combines classic XC performance with light trail duties, while a Motion Control damper completes the package, making Reba more capable than ever before. Features - New graphics package for a fresh, premium look - Highly tunable Solo Air spring - TwistLoc and OneLoc remote compatible

One of the most successful and hard-working RockShox forks of all time capitalizes on the innovations born from the latest SID. A chassis that combines classic XC performance with light trail duties and a Motion Control™ damper completes the package, making Reba as capable as ever before. - Proven Motion Control damper featuring low-speed compression adjust to lockout with external rebound adjust - Torque Caps compatible for a stronger, stiffer interface between fork and hub, giving you more control in the front wheel - Accepts Bottomless Tokens to easily custom tune the air spring performance to best match you own riding style and suspension preference - Solo Air spring for a plush, predictable ride you can set up in seconds

The XX SL Eagle T-Type 12-Speed 10-52t cassette is a major reason why Eagle Transmission offers one of the best-ever inboard and outboard shifting performance under load. Thanks to its full X-SYNC design, the harder you pedal, the better it shifts. This is the lightest Eagle cassette SRAM has made, as well as, their our most precise and long lasting. Its new-gen features a fully machined, hardened steel X-Dome architecture for gears 1-9 and an ultra-lightweight, all-aluminum Spider Cog for gears 10-12. Engineered as integrated and interdependent transmission components, the XX Eagle Transmission Cassette and derailleur contact directly, ensuring perfect alignment on every bike. - From its massive 520% gear range, the 52 tooth cog steps down with improved gear progression with 44 and 38 tooth cogs in the low end (compared to the Eagle drivetrain 10-52-tooth cassette) - New-gen design is SRAM's lightest 10-52t cassette due to the ultra-lightweight, all-aluminum Spider Cog - 55mm chainline compatibility for more moderate chain angle, longer wear and greater precision - Utilizes well accepted and broadly available XD driverbody - Featuring a clearly marked Setup Cog for simple and fool-proof installation - Not suitable for E-MTB

The all-new Rapide Cockpit is a lot more than just the fastest way to the finish line. It's the fastest leading edge we've ever made, putting aero gains in the clean air, where they matter most and shaving four watts off the already ultra-quick two piece Rapide Bar and Tarmac SL7 Stem. But to deliver a leading edge that provides a winning edge takes more than pure aero. The goal for the Roval engineering team was simple—the Rapide Cockpit had to be the fastest bar we've ever made, with no compromises. It's aero, light, stiff, and designed hand-in-hand with the best riders in the world and our Retül fit experts so you can get a grip on victory. AERODYNAMIC: Removing the cluster of hardware (where stem and handlebar connect) allowed us to design the bar's leading edge a single airfoil. We optimized this airfoil to provide a maximum advantage in clean air at speeds seen from long solo breakaways to full gas World Tour sprints. While a four watt improvement may seem small, it adds up to a 32cm lead over a 250m final sprint. When races are won by bike throws, this is a winning difference. LIGHT AND STIFF: By removing the stem's hardware cluster the Rapide Cockpit is 50 grams lighter (100mm x 420mm) than a two piece Rapide bar and Tarmac SL7 combo. Made from premium high-modulus carbon fiber, that delivers ideal stiffness for the biggest, fastest sprinters on the World Tour, the Rapide Cockpit has a higher stiffness-to-weight ratio than any two piece system we've ever made. FIT: The downside of one-piece cockpits has long been fit, but we partnered with our Retül fit professionals and the best riders in the world to ensure almost every rider can find their fit. We offer 15 different stem and bar combos, all at -6 degree, so we've got your race day position covered. The radius from tops to drops has been sculpted for wrist clearance whether out of the saddle in a final sprint or tucked in an aero position, while bend and flare reflect our favorite Rapide bar. - Aerodynamically engineered to save 4 watts vs a traditional aero road bar - Material: Premium High Modulus Carbon Fiber, Titanium Stem Bolts - Sizes: 15 combos from (75mm x 380mm) to (125mm x 440cm) - Bend: 125mm drop x 75mm reach, 4 degrees of flare at the drops - Stem Angle: 6-Degrees - Steer Clamp Diameter: 31.8 - Weight: 310 grams (100mm x 420mm) - Cable Routing: Shimano, SRAM, Campagnolo ( Internal/Electronic Compatible) - Compatible with Roval bolt on computer mount, S219900058. - System Weight Limit: 275lbs/125kg

The Mattoc is an amazing fork due to its versatility yet made even more amazing as its capability to do it all comes without compromise. The “versatile specificity” of this fork means that it adapts perfectly to many disciplines and styles of riding while performing flawlessly in each and every one. The Mattoc Comp’s 34mm Manitou engineered chassis keeps weight to a minimum while maintaining best-in-class stiffness. Its Expert Air spring with IVA technology, ABS+ compression damping, and in leg adjustable TPC rebound damping make for the smoothest ride you’ve experienced yet. With air, air volume, rebound and compression adjustments that smooth ride can be tailored to your specific needs. The next step to a better ride starts with Mattoc, #thepeoplesfork. Key Features: - 27.5” is 20g less than the previous model. - Expert air allows for internal travel adjustments with no added parts. - Expert Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Expert Air has identical performance to Dorado Air in a more cost effective package. - Incremental Volume Adjust (IVA) modifies the volume in the positive air chamber with self contained spacers dictating the position of the IVA piston. This allows the main air spring ramp-up to be tuned to the rider weight, style and conditions without the need for additional parts. - Absolute Plus (ABS+) is a shim stack based damper that features external incremental Low Speed compression adjustment. - 27.5” 110-150mm, 29” 110-150mm. - TSR (Trail Side Relief) casting bleed screws allow users to release casting pressure from the fork. Casting pressure increases during normal riding. Extreme riding can increase the pressure at a quicker rate. Temperature and elevation changes can also cause increased casting pressure. Releasing casting pressure can improve overall fork feel and small bump compliance. - Expert air spring and lower weight brings top level performance to a new price point.

The Mattoc is an amazing fork due to its versatility yet made even more amazing as its capability to do it all comes without compromise. The “versatile specificity” of this fork means that it adapts perfectly to many disciplines and styles of riding while performing flawlessly in each and every one. The Mattoc Comp’s 34mm Manitou-engineered chassis keeps weight to a minimum while maintaining best-in-class stiffness. Its Expert Air spring with IVA technology, ABS+ compression damping, and in leg adjustable TPC rebound damping make for the smoothest ride you’ve experienced yet. With air, air volume, rebound, and compression adjustments that smooth ride can be tailored to your specific needs. The next step to a better ride starts with Mattoc, #thepeoplesfork. Key Features: - 27.5” is 20g less than the previous model. - Expert air allows for internal travel adjustments with no added parts. - Expert Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Expert Air has identical performance to Dorado Air in a more cost-effective package. - Incremental Volume Adjust (IVA) modifies the volume in the positive air chamber with self-contained spacers dictating the position of the IVA piston. This allows the main air spring ramp-up to be tuned to the rider weight, style and conditions without the need for additional parts. - Absolute Plus (ABS+) is a shim stack-based damper that features external incremental Low-Speed compression adjustment. - 27.5” 110-150mm, 29” 110-150mm. - TSR (Trail Side Relief) casting bleed screws allow users to release casting pressure from the fork. Casting pressure increases during normal riding. Extreme riding can increase the pressure at a quicker rate. Temperature and elevation changes can also cause increased casting pressure. Releasing casting pressure can improve overall fork feel and small bump compliance. - Expert air spring and lower weight brings top-level performance to a new price point.

With more than 40 years of designing and building bicycles and components dedicated to adventures that go beyond limits or expectations, Tom created the new Ritchey WCS Adventure Fork for those of us that are unbound by the constraints of riding-surface type, seemingly insurmountable distances, or what you can carry on your bike. The new one-piece carbon monocoque WCS Adventure Fork has been meticulously engineered and painstakingly built to perform with razor-sharp accuracy, deliver a high level of comfort, and offer practical features for all manner of cycling adventures. Built with High Modulus Fiber (HMF), this impeccable adventure fork offers superior strength while also reducing road chatter fatigue on those endless days and nights in the saddle. Smooth internal fiber flow in the crown/steerer area delivers the best force transfer from the crown to the shaft and offers increased impact strength for those potholes you didn't see. With your desire to ride far and long in any condition or under any circumstance, the WCS Adventure Fork features rack mounts for packs full of gear and fender mounts to keep the grime off you and your bike. The three multi-purpose mounts on the legs give you more places to stow the necessities you gather at the last cafe. Welcoming flat-mount disc brake calipers, the WCS Adventure Fork also fits up to 48mm tires (depending on tire make and model)—making this fork the ultimate addition to any rig assembled for the purpose of seeking, discovering, and enjoying the adventure. - Material: carbon fiber - 1-1/8" straight steerer with integrated 45-degree crown race - Fits 1-1/8 and 44mm headtubes with appropriate headsets - 100x12mm thru-axle (included)—(100x15mm thru-axle conversion kit available separately) - Flat Mount disc brake - Disc brake rotor compatibility: 140 / 160mm - Steerer length: 300mm - Axle-Crown: 393mm - Rake/Offset: 50mm - Spacing: 60mm - Minimum tire clearance: 4mm Road / 6mm Off-Road - Wheel compatibility: 700c / 650b - Rack and fender mounts - Multi-purpose mounts on fork blades (includes black stainless-steel bolts) - Fork max payload: 3kg per side - Weight: 445g (with uncut steerer / not including axle)

Tom Ritchey was riding off-road decades before gravel riding was ever a "thing," and the new WCS Carbon Cross Gravel Fork is the manifestation of the experiences enjoyed on all of those dirty rides mixed with the legendary engineering for which Ritchey is famous. Built from life and ready for your drop bar off-road adventures, this full monocoque carbon fork delivers precision and confidence while offering stability and comfort along some of the more rugged terrain you'll encounter. With logical features—like enough room tires up to 40mm wide, the ability to run 12 or 15mm thru-axles, and ability to run flat-mount disc brakes—the Ritchey WCS Cross Gravel Fork is ideal for long-distance gravel events, your local cyclocross series, spontaneous weekend adventures, and everything in between. - Material: carbon fiber - 1-1/8" straight steerer with integrated 45-degree crown race - Fits 1-1/8 and 44mm headtubes with appropriate headsets - 100x12mm thru-axle (included) - Flat Mount disc brake - Disc brake rotor compatibility: 140 / 160mm - Steerer length: 300mm - Crown diameter: 47mm - Axle-Crown: 383mm - Rake/Offset: 47mm - Spacing: 53mm - Minimum tire clearance: 6mm - Wheel compatibility: 700c - Weight: 430g (with uncut steerer / not including axle)

The Oversized Pulley Wheel System for SRAM Red and Force AXS features a 15-tooth upper and 19-tooth lower pulley wheel setting for maximum efficiency. The handbuilt OSPW System has two spring tension settings that offer you customized setup based on riding conditions. This OSPW System is also compatible with the 2020 11-speed SRAM Red eTap derailleurs featuring a clutch. - Pulley wheels: CeramicSpeed 15-tooth upper and 19-tooth lower - Pulley wheel material: aluminum - Cage material: carbon-reinforced PA - Bearing options: CeramicSpeed Standard or Coated - Compatibility: SRAM Red AXS and SRAM Force AXS. 2020 SRAM Red eTap 11-speed derailleur with the orbit clutch. This system is also compatible with the wider-range Force AXS medium cage derailleur - Cassette Compatibility: Fits 12-speed 10-36 tooth cassettes. Fits 11-32 tooth cassettes when used with an 11-speed clutched derailleur - Spring Tension Settings: 2-spring - Speeds: 12-speed - Discipline: Road and Gravel/Cross - Custom tool included for removal of stock cage and securing of OSPW. The factory clutch mechanism will remain intact. There is no damage or modification to the clutch for the installation of the OSPW System In the box: - Complete OSPW System for SRAM Red/Force AXS - CeramicSpeed Pulley Oil, 15 ml dropper bottle - Custom tool for removal of stock cage and securing of OSPW System

- RC2T damper is only found at the Ultimate level and features externally adjustable, truly independent High and Low Speed Compression along with an increased range of rebound adjustment. - Riders can fine-tune damping from the factory base tune for a more personalized feel while factoring in ride style and terrain.

The Firestarter Carbon Fork is Salsa's high-end, rigid bikepacking fork. This sure-tracking platform features a carbon structure and 15mm thru-axle design, and the Three-Pack mounts on the forward portion of each leg allow use of Salsa Anything Cages or extra water bottle cages. - Axle to Crown Length: 483 mm - Brake Mount (Fork): Post Mount 160 - Crown Race: 40 - Front Axle: 15mm Thru x 100mm - Wheel Mount Center Offset (mm): 0 - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Steerer Tube Length (mm): 260 mm - Weight: 620 g - Wheel Size: 29er, 29+, 700c - Rotor Size (Fork): 200 - Maximum Tire Clearance (Fork): 3

The Firestarter carbon fork is made from high-modulus carbon fiber, built for all-terrain riding. Three-Pack mounts on each leg give you room for water or Anything Cages, and mid-blade mounts accommodate racks for panniers. This fork is light, tough, and ultra-versatile with the capacity to fit a wide range of tire sizes. - High modulus carbon fiber construction - Tapered 1-1/8" to 1-1/2" steerer tube - 160mm minimum rotor size; 180mm maximum rotor size - Mid-blade mounts for low rider racks - Compatible with wheel sizes: 27.5+, 29", 29+, 700c - Dual sets of Three-Pack mounts on each fork leg for Anything Cages or water bottles - BOOST 110 x 15mm thru axle included - Front Axle Size: 15 x 135L, TP=1.5, TL=10 - Internal routing for 110 BOOST dynamo hubs

- The stiffest and most aero integrated handlebar and stem system - All carbon construction - Di2 compatible with integrated junction box compartment and wiring conduits - Compact 125mm drop, 80mm reach - 395g

Designed for the latest hard-hitting enduro and trail bikes, Super Deluxe Ultimate features the ride tuning abilities of an air spring with both compression and rebound adjustment so you can fine-tune to any trail. With a solid threshold adjustment for pedaling performance and Maxima Plush fluid for a buttery-smooth feel, riders can now easily dial in a podium-worthy ride. - Maxima Plush damping fluid reduces friction and silences damper noise - Highly tunable DebonAir spring offers a coil-like consistent feel throughout the travel - Separate and independent open and threshold pistons are tuned exactly for your ride - Low Speed Compression adjustment allowing fine tuning of compression needs from the base tune

Designed for the latest hard-hitting enduro and trail bikes, the Super Deluxe Ultimate shock features the ride tuning abilities of an air spring with both compression and rebound adjustment to fine-tune to any trail. With a solid threshold adjustment for pedaling performance and Maxima Plush fluid for a buttery smooth feel, riders can now easily dial in a podium-worthy ride. - Highly tunable DebonAir spring offers a coil-like consistent feel throughout the travel - Separate and independent open and threshold pistons tuned exactly for your ride - Low-Speed Compression adjustment allowing fine-tuning of compression needs from the base tune - Maxima Plush damping fluid reduces friction and silences damper noise

Infused with the properties of carbon fiber, our lightest saddle ever is the fruit of extensive product development. The SuperFlow cutout provides unparalleled comfort in the stylish guise of the SLR. A fascinating combination of lightweight construction and superior strength makes it the ideal answer to the needs of amateurs and professionals alike. Combining pure technology and a passion for excellence, the SLR C59 sets a new benchmark in riding technology, the finest incarnation of the Selle Italia spirit. - Weight: S 61g - Rail: Hi-Tech Carbon 7x9 mm - Dimensions: 128x265 mm - Category: Hi Performance - This saddle can withstand a maximum weight of 90 kg - This saddle is suited to road use only

The one-piece carbon monocoque WCS Carbon Disc Road Fork has been meticulously engineered and painstakingly built to perform with razor-sharp accuracy, offering a comfortable yet lively riding experience. Built with High Modulus Fiber (HMF), this impeccable road fork offers superior strength and a superb road feel. Smooth internal fiber flow in the crown/steerer area delivers the best force transfer from crown to shaft and increased impact strength. The orientation of the fibers has been optimized to absorb and dissipate loads, which delivers a confident and comfortable ride. The fork also uses various fiber types based on their specific properties to manage different load types as well as possible in the areas in which they occur—such as side load, torsion, and impact. The WCS Carbon Disc Road Fork features a 46mm rake and includes a compression plug. Welcoming flat-mount disc calipers, this fork also fits up to 30mm tires, depending on tire make and model. - Material: carbon fiber - 1-1/8" straight steerer with integrated 45-degree crown race - Fits 1-1/8 and 44mm headtubes with appropriate headsets - 100x12mm thru-axle (included) - Flat Mount disc brake - Disc brake rotor compatibility: 140 / 160mm - Steerer length: 300mm - Crown diameter: 46mm - Axle-Crown: 371mm - Rake/Offset: 46mm - Spacing: 40mm - Minimum tire clearance: 4mm - Wheel compatibility: 700c - Weight: 390g (with uncut steerer / not including axle)

SRAM GX Eagle drivetrains are engineered for optimal performance. Eagle drivetrains are designed, tested, and proven to deliver durable performance for all riders. Eagle technology provides an expanded, optimum gear range and is 100-percent compatible with all levels of SRAM Eagle drivetrain systems. - The GX crankset is engineered for complete chain control with each tooth precisely designed to work seamlessly with the chain’s inner and outer links - The GX Eagle rear derailleur gets the job done with an updated cage architecture that improves chain management and is compatible with both 10-52T and 10-50T cassettes - The XG-1275 10-52T cassette offers expanded 520% gear range and features SRAM's Full Pin technology, making it both lightweight and durable - The trigger shifter puts total control of your gear selection into the thumb of one hand - GX Eagle chain for smooth and efficient shifting - DUB bottom bracket sold separately

The Campagnolo Super Record EPS Ergopower shift lever features effective ergonomics and the best of Campagnolo's shifting and braking technology. - Campagnolo's Multishifting technology allows you to change several sprockets on the 12-speed cassette with a single shift - When the chain engages immediately, the derailleurs can be actioned with minimum effort and in any position on the handlebars, allowing for quick shifting - The controls offer a stable and safe grip when standing pedaling or when leaning high on the handlebars - Shaped cushioning and an adjustable reach make these controls perfect for any cyclist, regardless of hand or finger size - The flat-mount Campagnolo brake caliper ensures powerful, modular braking in any situation owing to pistons measuring 22mm in diameter - Brake pad return guaranteed by the magnetic system ensures that there is no friction at the time of brake lever release - A special metal plate positioned between the pad and the caliper piston, cushions the vibrations during braking Specifications: - Pad Compound: Semi-Metallic - Brake Caliper Mount: Flat Mount - Hydraulic Fluid Type: Mineral Oil - Front Der/Shifter Compatibility: Campy Record/Super Record EPS - Adjustable Reach: Yes - Drivetrain Speeds: 12

The Campagnolo Super Record EPS Ergopower shift lever features effective ergonomics and the best of Campagnolo's shifting and braking technology. - Campagnolo's Multishifting technology allows you to change several sprockets on the 12-speed cassette with a single shift - When the chain engages immediately, the derailleurs can be actioned with minimum effort and in any position on the handlebars, allowing for quick shifting - The controls offer a stable and safe grip when standing pedaling or when leaning high on the handlebars - Shaped cushioning and an adjustable reach make these controls perfect for any cyclist, regardless of hand or finger size - The flat-mount Campagnolo brake caliper ensures powerful, modular braking in any situation owing to pistons measuring 22mm in diameter - Brake pad return guaranteed by the magnetic system ensures that there is no friction at the time of brake lever release - A special metal plate positioned between the pad and the caliper piston, cushions the vibrations during braking Specifications: - Pad Compound: Semi-Metallic - Brake Caliper Mount: Flat Mount - Hydraulic Fluid Type: Mineral Oil - Front Der/Shifter Compatibility: Campy Record/Super Record EPS - Rear Der/Shifter Compatibility: Campy Record/Super Record EPS - Adjustable Reach: Yes - Drivetrain Speeds: 12

Cane Creek is proud to introduce the new Air IL and Coil IL shocks packing class-leading performance in a smaller and stronger package. IL shocks feature class-leading externally adjustable DB Twin Tube technology for the widest range of 4-way damping adjustability on the market. Both AIR IL and Coil IL now feature a thicker inner damper tube for increased strength and a 17mm reduction in overall width on the valve body to increase fitment possibilities on tight frames. AIR IL features a 6mm reduction in the outer diameter of the Air spring to further increase the likelihood of fitment while increasing the max psi pressure up to 350psi (Up from 300psi). Coil IL features added detents on the preload collar allow more precise preload tuning. Hand-assembled and individually dyno-tested in our Western North Carolina facility, IL shocks continue to provide a level of quality, performance, and rider benefit that is unmatched. - Cane Creek Coil IL shocks are not compatible with bikes that use "clevis" style suspension designs (including Specialized Stumpjumper & Turbo Levo models) – please contact our support team for questions or concerns. **Coil shocks are sold without Spring or Hardware.**

DBair IL is a twin-tube inline air shock with superior performance and reliability. The first shock to feature Cane Creek's LinEair Spring, the DBair IL is the best of both worlds, an air shock that feels more supple, linear and seamlessly supportive throughout its travel. - 4-Way independent adjustment - high and low speed compression, high and low speed rebound - Twin-tube damping for unparalleled small bump compliance - Climb switch lessens low-speed compression and rebound damping at the same time for improved climbing traction - Hand assembled and Individually dyno-tested

Ritchey's history with cyclocross runs long and deep, sort of like the mud sections of your favorite 'cross course. The WCS Carbon Cross Disc Fork is designed from the ground up to manage the unique stresses a disc brake demands – including a carbon layup that resists twisting under hard braking. Decades of experience between the course tape, and building the bikes and components designed to win, inform the performance and design details of this fork. It employs a monocoque construction, it's compatible with standard and integrated headsets, and features carbon dropouts and disc mount. - Blade: Carbon - Crown: Carbon - Steerer: Carbon - Steerer Length: 300mm - Steerer Diameter: Tapered 1-1/8 – 1.5-inch - Rake: 45mm - Blade Shape: Curved - Drop out: Carbon - Rotor size: 140mm (160 w/ adapter) - Crown Diameter: 45mm - Integrated 45-degree crown race - Axle-to-Crown: 395mm - Finish: Matte UD carbon - Weight: 440g (w/ uncut steerer) - Compression plug included

With bigger bikes come bigger demands. The new Domain takes cues from ZEB, our enduro specialist fork with serious credentials. Domain offers a new burly 38mm chassis, short fender compatibility, and a confidence-inspiring DebonAir air spring matched with a reliable Motion Control RC damper. We even brought the performance of Maxima Plush damping fluid along for the ride. Nothing goes as big as Domain does in value and performance. - 38mm chassis for increased stiffness and rider confidence - Motion Control RC damper featuring low speed compression adjust with externally adjustable dual-flow rebound - Highly tunable DebonAir air spring offers a consistent feel throughout the travel - Maxima Plush damping fluid reduces friction and quiets damper noise - Short fender compatible. RockShox premium fender sold separately. AM Variants include RockShox zip-tie fender - Fits tires up to 2.8" without fenders—use of any fender may reduce tire clearance

The new Record 12x2 Speed crankset: a new hole-free design for the right-hand crank that optimizes aerodynamics. The new carbon fiber Record 12x2 Speed crankset with unidirectional finishing guarantees continuity with the finishing of the entire groupset, whilst maintaining the Ultra-Torque bracket system on the steel axle to ensure perfect transmission of power. The new Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters without affecting the Q factor that remains constant at 145.5 millimeters. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) enable reducing the weight through greater use of carbon fiber. There are eight fixing screws for increased structural stiffness. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.

The ultimate aftermarket disc brake specific road cycling fork featuring 32mm of tire clearance and solid 12mm thru-axle for secure and confident handling. Building upon nearly a decade of experience making the world's best forks, ENVE's latest road disc fork features a modern 32mm of tire clearance, a low axle-to-crown height of 370mm, internal hose routing, and a lightweight one-piece form construction developed specifically to handle the demands of disc brakes, rough roads, and large volume tires. - Material: Carbon Fiber - Steerer Tube Length: 350mm - Rake: 43, 50mm - Axle to Crown: 370mm - Brake: Disc - Axle Compatibility: 12mm - Max Rotor Size: 160mm - Max Tire Clearance: 32mm - Crown Race Diameter: 1.25 - Torque Spec: Steer Tube: 5Nm - Torque Spec: Axle: 8Nm - Weight: 425g

FSA's SL-K Light ABS BB386EVO road crankset features hollow carbon fiber arms for amazing stiffness and low weight. The adaptable BB386 EVO 30mm spindle will fit a wide variety of frames with a range of BB standards. The K-Force Light ABS BB386 EVO uses FSA’s Asymmetric Bolt Standard, with four bolts. Choose from the traditional 53/39 chainring combination, 50/34 compact or 52/36 semi-compact. The unidirectional carbon finish, updated graphics and concealed chainring bolts make the K-Force Light look as fast as it is. - Hollow carbon arms with UD carbon finish - Forged AL7050 BB386EVO spindle - AL7075 100% CNC chainrings - AL7075 Torx T-30 alloy chainring bolts with tabcover - Fits Shimano and SRAM 10-11 speed systems

The Kingpin Deluxe fork is perfect for fat bike expeditions, keeping you nimble even when fully loaded. Dual Three-Pack mounts on each leg let you attach water bottles or Anything Cages, and mid-blade mounts fit low rider racks for panniers. Or, ditch the gear and hit the trails with an ultra-light and responsive fork. - High modulus carbon fiber construction - Tapered 1-1/8" to 1-1/2" steerer tube - 160 minimum rotor size; 203mm maximum rotor size - Dual sets of Three-Pack mounts on each fork leg for Anything Cages or water bottles - Mid-blade mounts for low rider racks - Internal routing for 150mm spaced dynamo hubs - Maximum Tire / Rim sizes: 26 x 5", 27.5 x 4.0", 29 x 3.0" - 150 x 15 mm thru axle included - Front Axle Size: 15 x 198L, TP=1.5, TL=9

The Waxwing Deluxe fork is designed to thrive on gravel. Its carbon-fiber construction is lightweight and soaks up micro-impacts on rough roads. The 12 x 100mm thru-axle keeps Waxwing stiff for steady tracking and responsiveness when dodging ruts, potholes, and road debris really matters. Waxwing Deluxe is compatible with both 700c and 650B wheels so you run your preferred size. Three-Pack mounts, mid-blade low-rider rack mounts, fender mounts, and internal dynamo hub cable routing add form and function. The Waxwing Deluxe fork is standard equipment on the 2019–2020 Warbird, and is available in a version painted to match the Warbird frameset. - Thru-Axle included - Axle-to-Crown Length: 405mm - Brake Type: Disc, flat mount, 160mm maximum rotor size, 42mm bolt length - Color: Black - S.H.I.S. Crown Race: 40mm, 36°, integrated crown race - Fork Rake: 50mm - Front Axle Type: 12mm thru-axle - Front Axle Size: 12 x 120mm, TP = 1.5, TL= 12mm - Front Hub Spacing: 100mm - Material: High-modulus carbon fiber - S.H.I.S. Clamp Diameter: 28.6mm - Steerer Tube Length: 350mm - Steerer Type: 1-1/8" to 1-1/2" tapered - Weight: 520g - Max tire size: 700c x 45mm or 650B x 51mm

The XX1 Eagle Fat Bike DUB crankset has been re-examined and re-engineered. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility, and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Carbon-tuned lay-up crank design provides extreme stiffness and light weight - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Fat bike frame compatible - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 170/177 Hubs

The XX1 Eagle Fat Bike DUB crankset has been re-examined and re-engineered. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility, and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Carbon-tuned lay-up crank design provides extreme stiffness and light weight - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Fat bike frame compatible - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 190/197 Hubs

Sleek and serviceable, the Whisky No.9 CXLR Fork is a tough, lightweight upgrade for gravel riders and bikepackers looking to carry a little cargo up front. Sporting 3-pack mounts, mid-blade mounts for low-rider rack compatibility, and fender eyelets on the outside of the fork legs for easy mounting, the CXLR keeps everything clean and tidy with internal routing for brakes and dynamo hubs. Additional features like flat-mount brakes, 12mm thru-axles, and ample tire clearance make this standout piece perfect for your packing setup. - 12mm thru-axle, 100mm spacing - 700c x 42mm or 650b x 50mm max recommended tire size - ASTM Condition 3 – For rough off-road riding and jumps less than 24 - Includes thru-axle and Whisky Parts Co. compression plug - Brake Mount: Flat Mount 140 - Material: Carbon - Weight: 526g - Steerer Type: Tapered - Offset/Rake: 45 - Steerer Tube Length: 350mm - Axle to Crown Length: 395mm - S.H.I.S. Crown Race Diameter: 40 - S.H.I.S. Stem Clamp Diameter: 28.6 - Fork Minimum Rotor Size: 140 - Fork Maximum Rotor Size: 160

The Whisky No.9 MCX “monster cross” fork brings extra-wide tires to your drop-bar bike. How wide? The MCX accommodates tires up to 700c x 51mm or 650b x 61mm (that’s 2.4-inches). A relatively short 415mm axle-to-crown minimizes the geometry effects of a larger fork, and a 51mm offset improves toe clearance with large tires or fenders. The design draws from our CX forks, with lightweight carbon construction, a 12mm thru axle, and flat-mount brakes. Three-Pack mounts, dynamo cable routing, and fender mounts (700c x 45mm tire clearance with fender) add versatility for bikepackers and gravel riders. - 12 x 100mm thru-axle - Designed for flat mount disc brakes - Hidden, removable fender mounts - 700c x 51mm or 650b x 61 mm max tire size - ASTM Condition 2 - For off-road riding and jumps less than 12-inches - Includes thru axle and Whisky Parts Co. compression plug

For carving XC courses, going the distance on gravel roads, or roaming along bikepacking routes, the Whisky No.9 MTN Boost Fork brings a new dimension to your mountain bike. Lighter and stiffer than a suspension fork, it’s long enough to replace forks with 120mm to 130mm of travel. The boost 110mm spacing means your current wheels will likely bolt right in, and clearance for up to a 29 x 3.0" or 27.5 x 3.0" tire lets you alter your setup for wherever you’re riding. The Three-Pack mounts handily hold extra water, camping gear, tools, tubes, and more. - 15mm thru-axle with 110mm Boost spacing - Post-style brake mount - 1.5" tapered carbon steerer - Two sets of Three-Pack mounts - ASTM Condition 3 - For rough off-road riding and jumps less than 24"

The new Super Record 12x2 Speed Disc Brake groupset is Campagnolo's highest expression of technology and evolution. It is geared towards riders who want to equip their bicycle with the best the market offers in terms of performance and distinctiveness. The need to improve what is already considered the benchmark means every single detail, even the most basic, is attended to. The new Super Record 12x2 Speed Disc Brake groupset is presented on the market with an innovative rear derailleur designed with 3D Embrace technology that enables the chain to maintain the highest level of traction, even on the smallest sprockets. The new front derailleur with its double connector rod system enhances the use of the 24 speeds and takes full advantage of each combination of metric development. It always finds the ideal ratio for every incline. The new Ergopower controls are even more ergonomic due to the unique shape of the levers that allow for even better operation. The new crankset with the two-by-two coupling of the arms is a step forward in stiffness, whilst keeping constant the technologies and advantages characteristic of Super Record. The new sprocket packs contain an extra sprocket and highlight the incredibly technological processing of the larger sprockets enclosed in the two triplet single-piece monolith units. The new 5.2 mm chain maintains the high Campagnolo standards, enhancing the derailings of the new Super Record drivetrain through the alignment of the pins on the external links. Last but not least, the Disc Brake technology developed by Campagnolo for the 2018 product range ensures that the Super Record groupset has the greatest braking force and modulability possible.

The XX1 Eagle DUB crankset has been re-examined and re-engineered. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility, and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Carbon-tuned lay-up crank design provides extreme stiffness and light weight - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Boost Compatible - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs

True competitors are always looking for a performance advantage—a relentless pursuit of equipment that is lighter, stiffer, stronger, and more durable. To create the best drivetrain possible, we re-examined and re-engineered our crankset design. Our all-new XX1 Eagle CARBON TUNED crankset is our lightest, stiffest, and strongest to date. DUB technology enhances this by simplifying the relationship of the spindle to the bottom bracket and redefining the measure of durability. DUB-powered cranksets deliver simplicity, compatibility, and durability. - DUB technology delivers the lightest, stiffest, and strongest crankset available - SRAM CARBON TUNED crank technology provides extreme stiffness and low weight - The X-SYNC 2 chainring provides significantly quieter performance with better mud clearing and extraordinary durability - New colorway is matched to work with XX1 Eagle AXS-enabled componentry

True competitors are always looking for a performance advantage—a relentless pursuit of equipment that is lighter, stiffer, stronger, and more durable. To create the best drivetrain possible, we re-examined and re-engineered our crankset design. Our all-new XX1 Eagle CARBON TUNED crankset is our lightest, stiffest, and strongest to date. DUB technology enhances this by simplifying the relationship of the spindle to the bottom bracket and redefining the measure of durability. DUB-powered cranksets deliver simplicity, compatibility, and durability. - DUB technology delivers the lightest, stiffest, and strongest crankset available - SRAM CARBON TUNED crank technology provides extreme stiffness and low weight - The X-SYNC 2 chainring provides significantly quieter performance with better mud clearing and extraordinary durability - New colorway is matched to work with XX1 Eagle AXS-enabled componentry

The XX1 Eagle crankset features a special hollow internal architecture, combined with SRAM's Carbon Tuned technology to provide extreme stiffness and low weight. An X-SYNC 2 chainring offers significantly quieter performance with better mud clearing and extraordinary durability. As a part of the SRAM Eagle ecosystem, this crankset was developed for a superior 1x drivetrain experience. - SRAM DUB technology creates a lighter, stiffer, and stronger crankset - For use with a Cannondale Ai frame interface - Carbon-tuned lay-up crank design provides extreme stiffness and low weight - Included direct mount X-SYNC 2 chainring provides significantly quieter performance with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - Use with SRAM Eagle chain for optimum performance

True competitors are always looking for a performance advantage—a relentless pursuit of equipment that is lighter, stiffer, stronger, and more durable. To create the best drivetrain possible, we re-examined and re-engineered our crankset design. Our all-new XX1 Eagle CARBON TUNED crankset is our lightest, stiffest, and strongest to date. DUB technology enhances this by simplifying the relationship of the spindle to the bottom bracket, and redefining the measure of durability. DUB-powered cranksets deliver simplicity, compatibility, and durability. - DUB technology delivers the lightest, stiffest, and strongest crankset available - SRAM CARBON TUNED crank technology provides extreme stiffness and light weight - The X-SYNC 2 chainring provides significantly quieter performance with better mud clearing and extraordinary durability - New colorway is matched to work with XX1 Eagle AXS-enabled componentry

Conquer It All. The ride possibilities and experiences are endless- the new X series will provide the means to explore them. Our most versatile platform yet features an all-new T3 compression adjustment, a new rebound design, and a modern design aesthetic. The real concept behind the Jade X was to offer a coil that still retained some of the best attributes of an air shock—pedaling efficiency and "on the fly" quick adjustments. Since there were fewer external adjustments, we really had to nail the compression and rebound tune. For this, we created a brand new high-flow piston to allow for more shims to control precise points of the stroke. The rebound and compression damping get strong where you need it and back off in situations where the wheel needs to move quick. The high/low-speed compression and rebound now work dynamically to provide great support, control, and zero packing on high-speed chatter. The end result is the most versatile coil shock option on the market. Achieve amazing pedaling efficiency with trophy truck DH performance at the flip of a switch. - T3 Compression Adjust - Low-Speed Rebound - Bladder Pressure Adjust - New Rebound Design Eliminates Packing - New and Improved Piston Design - Shim Stack Controlled Compression and Rebound

The next generation Topaz 3 is designed to meet the grueling demands of the modern rider with a 27% stronger inner shaft. The new housing is designed around a transverse reservoir layout to aid in oil flow and achieve more frame clearance. The updated bladder system provides unmatched small bump sensitivity that’s externally tunable thanks to the T3 compression, dynamic rebound, positive and negative volume adjustment, and adjustable bladder pressure. The shock comes in its own reusable carrying case, and includes a shock pump and quick-clip volume spacers. - T3 Compression for 3 quick compression settings for whatever terrain lays ahead. For finer tuning, quick-clip volume spacers easily adjust the positive and/or negative air spring - The reservoir has an adjustable bladder to change ride characteristics based on rider’s preference - Low Speed Rebound Adjust - Adjustable Negative and Positive Volume via Spacers - Adjustable Bladder Pressure - Cooling Fins on Reservoir

A purpose built carbon fiber fork for gravel and cyclocross applications featuring internal hose routing, flat mount brake compatibility, and clearance for up to 50mm tires. This fork is perfect for gravel riders looking for more clearance, weight savings, compliance, and the versatility of fender mounts to enhance their gravel grinding experience. - Material: Carbon - Weight: 520g - Steer Tube Length: 350mm - Rake: 50mm - Axle To Crown: 395mm - Max Rotor Size: 140mm – 160mm - Max Tire Clearance: 700c x 50c, 27.5 x 2.25-inch - Crown Race Diameter: 1.5-inch - Torque Spec - Steer Tube: 5.5Nm - Torque Spec - Axle: 8Nm

Whether on the starting line or not, the X0 Eagle T-Type 12-Speed rear derailleur brings competition-tested prowess to riders who let their riding prove everything. Engineered as integrated and interdependent transmission components, the X0 T-Type derailleur mounts around the wheel axle itself, contacting the cassette directly with a first-of-its-kind Hangerless Interface. This foundationally changes the entire relationship between cassette and derailleur. Beyond that, its Full Mount attachment method creates a far stronger connection that grips both sides of the frame. These X0 T-Type rear derailleur features the same intuitive pairing and set-up procedure as our Eagle AXS™ derailleurs - Competition proven strength and reliability - X0 Eagle derailleur is especially robust, allowing for common maintenance that serious riders demand - Features an overload clutch that boosts resiliency and a tucked-in profile that houses protection covers on the B-knuckle and outer link that are fully replaceable - Aluminum cage - Battery Not Included

The XX Eagle T-Type 12-Speed 10-52t cassette is a major reason why Eagle Transmission offers one of the best-ever inboard and outboard shifting performance under load. Thanks to its full X-Sync design, the harder you pedal, the better it shifts. Literally. Engineered as integrated and interdependent transmission components, the XX Eagle Transmission Cassette and derailleur contact directly, ensuring perfect alignment on every bike. - From its massive 520% gear range, the 52 tooth cog steps down with improved gear progression with 44 and 38 tooth cogs in the low end (compared to the Eagle drivetrain 10-52-tooth cassette) - Lasts far longer and delivers more precision with the use of less extreme chain angles throughout the entire range - Featuring a clearly marked Setup Cog, install is both simple and fool-proof - Utilizes hardened tool steel machined X-Dome design for the cluster and stamped steel 38t and 44t cogs are pinned to the lighter weight aluminum 12th gear (Spider Cog) - 55mm chainline compatibility for more moderate chain angle, longer wear and greater precision - Utilizes well accepted and broadly available XD driverbody

With multiple World Championship medals, EWS wins and Olympic gold medals to its name, SRAM XX Eagle cranks set the standard, now the XX SL Eagle T-Type carbon crank is the pinnacle. Inside, it has been engineered with an ultra-strong but ultra-light design that utilizes carbon fiber with a hollow core – still one of the lightest ISO certified cranks on the market, maximized for title winning stiffness. - XX SL Eagle T-Type crank is an ultra-strong, incredibly light hollow-core carbon fiber design that's weight optimized and SRAM's lightest - 55mm Chainline - 168mm Q-factor - DUB bottom bracket and spacers NOT included

The family grows and together with the Disc and Gravel models, the Futura Cross model completes the range of disc brake solutions for off-road enthusiasts whether it be pure cyclocross, b-roads, or off-road adventures. The famous lines of the Futura fork are widened and lengthened on the Futura Cross fork to allow riders to mount larger, more tasseled tires. The Futura Cross fork can mount up to 47mm tires on 700c wheels, but more interesting is the option of mounting 27.5” wheels with a 2.1” tire; a standard tire choice that is becoming the choice of more and more gravel and monster-cross riders. Following industry standards, the fork is designed for 12mm thru-axles and flat-mount disc brakes to ensure compatibility with the majority of modern road and cyclocross disc-brake groupsets. Further increasing the range of steerer options within the Futura line, the 1.5” oversized steerer is synonymous with stability and durability, desirable traits on uneven or slippery terrain. The external cable guides are designed to make it as easy as possible to mount and maintain the fork and braking system, facilitating the cleaning and care of your fork and headset. The built-in eyelets near the dropouts give you the option of mounting a front mudguard which, when not being used, is closed with flathead screws that disappear into the lines of the fork creating a seamless and elegant continuity. Last but not least, the innovative Multi-Rake system provides frame designers with more freedom to design when it comes to geometry and trail, and an adjustable set-up based on use and choice of tires ensures riders will find the perfect fit. - T700S monocoque carbon fiber - 300mm tapered carbon steerer - Clearance for tires up to 700x47c or 27.5"x2.1" - 12x100mm thru-axle, carbon fiber dropouts with aluminum inserts - Two position axle inserts allow for either 47mm or 52mm rake - Flat mount disc brake compatible with rotors up to 180mm - Internal cable routing for a clean appearance - 450g (±10g)

Whether you’re racing to make it to your meeting across town or striving for a personal best down your favorite new trail, the AWL e-SUV fork will get you there on time and in style. Featuring an all-new chassis, RAIL damper, and different travel options, the AWL is equipped to forgive rock and roots as well as curbs and potholes. Includes integrated mounts for fenders, lights and accessories. - Award-winning RAIL damper delivers premium suspension performance with simple yet effective adjustability and maximum durability - Stiff 34mm e-optimized chassis meets the most stringent e-bike testing standards - Integrated fender and light mounts delivery maximum versatility - Clearance for tires up to 2.6” wide - 160-230 mm rotor compatible